|

















|
THIS
PAGE IS NOT UP TO DATE - follow this link

ENMET
offers the widest selection of portable and stationary gas detectors available including
the NEW TARGET multi-function portable, the worlds most innovative and
versatile portable gas detector for confined space entry.
Single Gas Portable Instruments
OX-2000 hand
held portable oxygen monitor
TX-2000 hand held portable toxic gas detector with a wide range of sensors
EX-2000 hand held portable combustible gas detector
SPECTRUM
Single gas portable available with a wide range of sensors
SMART LOGGER Single gas portable with a wide range of field-interchangeable sensors
and data-logging capabilities
Multiple Sensor Portable Instruments
TARGET Newest 5 sensor instrument capable of supporting combustible and oxygen
sensors, and up to three toxic sensors, one of which can be a broad range toxic for
Municipal or Haz- Mat applications. Unit can be a 1, 2, 3, 4, or 5 sensor instrument and
has full data-logging capabilities.
QUADRANT Four sensor portable typically set up with Combustible, Oxygen, Hydrogen
Sulfide and Carbon Monoxide sensors.
OMNI-4OOO Four sensor portable with field interchangeable sensors and data-logging
Permanent Instruments
Combustibles Enmet manufactures a variety of Combustible gas detectors for both
hazardous and non-hazardous applications
Oxygen Enmet offers a variety of oxygen monitoring instruments
Toxics Enmet also has a full range of stationary chemically specific toxic instruments
for a wide range of toxic gases including their popular broad range solid state units that
monitor and alarm for a variety of toxic gases
WETWELL Monitor is a three sensor instrument that monitors wetwells for oxygen,
combustibles and includes either a chemically specific on non-specific toxic sensor
Air Filter Panels and Monitors
AFP Breathing air filter panels remove oil/water and particulates
RAL Breathing Air Monitors for oxygen and toxic gases in your breathing air lines
AFP-RAL Air filter panels with integrated gas detection
SINGLE SENSOR PORTABLES

OX-2000/TX-2000
Hand held oxygen/toxic monitor
|

EX-2000
Hand held combustible gas detector
|

The SPECTRUM series is available with
one of a variety sensors including Carbon Monoxide, Hydrogen Sulfide, Ammonia, Chlorine,
Hydrogen Cyanide, Oxygen, Hydrogen, Ozone, Sulfur Dioxide, Nitrogen Dioxide, Nitric Oxide
and more. |
Unlike the SPECTRUM
which has to be ordered for a single specific gas, the SMARTLOGGER features a
variety of field-replaceable sensors which are pre-calibrated and can be plugged into the
instrument at any time without calibration between sensor changes. It also has full
data-logging capabilities.

|
Back to top
MULTIPLE SENSOR PORTABLES
 |
The TARGET is the latest portable gas
detector from Enmet Corporation. The TARGET can support from one to five sensors
and in its typical Municipal confined space entry application uses combustible, oxygen and
a broad range toxic sensor. For applications where specific toxic gas sensors are required
the TARGET can be configured with combustible, oxygen and up to two chemically
specific and one broad range toxic sensor. The TARGET has full data-logging
capabilities and an optional external or internal sample draw pump. |

The QUADRANT is a four sensor gas
detector with combustible, oxygen, hydrogen sulfide and carbon monoxide sensors. |
The OMNI-4000 is the
multiple sensor version of the SMARTLOGGER. It supports four of the same
pre-calibrated field interchangeable sensors used in the SMARTLOGGER including a
new broad range toxic sensor. It also has full data-logging capabilities.

|
| A motorized or hand operated aspirator kit is available for the
portable instruments to allow remote sample draw to bring the air to the tester. |

|
Back to top
STATIONARY GAS DETECTORS
Enmet offers a variety of stationary gas detectors
for toxics, combustibles and oxygen.
The ENGUARD is a
hazardous gas monitor which can accept up to ten 4-20mA sensor transmitters.
Sensor/transmitters are available for Oxygen, Carbon Monoxide, Hydrogen Sulfide, Chlorine,
Sulfur Dioxide, Nitrogen Dioxide, Ozone, Ammonia, Hydrogen Cyanide, Nitric Oxide, Hydrogen
and combustible gases and vapours.

|

The ISA-M is a rugged gas and
vapour monitor for toxic and combustible gases. The ISA-M can have a
number of remote sensors and includes alarms and control relays |

A low cost gas monitor, the SPECTRUM
ON-LINE is ideal for monitoring ambient air for toxic gases in a laboratory or
light industrial environment. |
For those applications where
inert gases and the like are present or where toxic or combustible gases may displace the
oxygen ENMET offers the ISA 40 (1 alarm level) and ISA 50
(2 alarm levels) stationary monitors. These instruments monitor the environment for oxygen
deficiency or enrichment or both (ISA 50)

|
| The 440-WW is a permanent wetwell monitor designed
to monitor municipal and industrial wetwells. Wetwells can contain combustible and toxic
gases as well as oxygen deficiency. Any number of toxics may be present, so the ENMET
Wetwell Monitor utilizes a broad range toxic sensor which is capable of detecting a
variety of toxic gases. Its non-specific characteristics wont tell you what is
there, just that its toxic. Wetwell monitors with hydrogen sulfide and/or carbon monoxide
sensors are limited to those two toxic gases
.severely restricting the detectors role
of protecting the workers. If the sensors cant detect it... the instrument
cant warn you that its dangerous. The same warning applies to portable units. |
 |
Back to top
| A new generation of microprocessor based breathing air
monitors is now available from ENMET for use with process control systems. A 4-20mA
output is available to link into building management systems. 
|

The ISA-66RLU system is a stationary HVAC system to
control Carbon Monoxide levels in parking garages etc. |
RESPIRATORY AIR
MONITORING
|
It is imperative that all in-plant supplied air respiratory
lines be filtered and monitored. The AFP-82-RAL is a wall mount air
filter and monitor package that filters the breathing air for oil/water, particulates and
eliminates odours. The gas detector can monitor this air for toxics and/or oxygen to
ensure safe air for the employee. If the air supply to the plant compressor gets
contaminated or there is a compressor failure, the air supply to the workers can be
contaminated causing serious injury or death. If your plant air is filtered then an ISA-RAL-M
can monitor your breathing air for toxic gases and trigger the appropriate
alarms. |
Back to top
If you would like to get more information about any
of the above products, please go to our Info Request page.
Visit
ENMET's Website
MANUFACTURERS
| LOCATION MAP | WHAT'S NEW |
ARTICLES
TRADE SHOWS | INFO REQUEST |
EQUIPMENT FOR SALE
CANADIAN SAFETY EQUIPMENT
INC.
Tel:(905) 949-2741 or 1-800-265-0182
Fax:(905) 272-1866
2465 Cawthra Road, Unit 114 ( Directions to our
building )
Mississauga, Ontario, Canada L5A 3P2
e-mail: info@cdnsafety.com
Copyright © 1997-2010, Canadian Safety Equipment Inc. All rights reserved.
Design and Maintenance by
Webstar
Solutions
Updated: August 12, 2010
|