CON-SPACE COMMUNICATIONS

THIS PAGE IS NOT UP TO DATE - follow this link

CON-SPACE Communications is recognized world-wide for their hard-wired communications system for use with S.C.B.A. and airline respirators in confined space entry/rescue applications. It can also be used with airline/SCBA where normal radio systems just won't work.

Model 800 Hard-wired communication system for one to one worker communication. A splitter can be used for 2 workers and 1 attendant. Up to 1500 feet from entrant to attendant.

Model 1100 Same as model 800 only CSA approved intrinsically safe.

Model 2100 Three worker version of model 1100 capable of expanding to 7 worker/rescuers.

SR-65i radio interface with throat microphone and earpiece for use with portable radios in conjunction with SCBAs and airline respirators. Headset available for non breathing air applications.

RESCUE PROBE The CON-SPACE Rescue Probe is a 2-way communication accessory designed to provide First Responders with a basic means of Victim location in a Structural Collapse.

SUPPLIED AIR RESPIRATOR COMMUNICATION SYSTEMS

MODEL 2100
HARD-WIRED SYSTEM
FOR UP TO 3 ENTRANTS
(EXPANDABLE TO 6)
AND ONE ATTENDANT

MODEL 1100
1 ENTRANT / 1 ATTENDANT
OR 1 ATTENDANT AND 2 ENTRANTS

SR-65
CON-SPACE SR-65i INTRINSICALLY SAFE RADIO INTERFACE SYSTEM
FOR FIREFIGHTERS

RESCUE PROBE

The Probe was developed with the help of experienced Rescue Professionals across North America. Victims in a collapsed structure have reported hearing Rescuers moving close by and were not able to make the Rescuers hear them, even when shouting. An extremely sensitive omni-directional microphone gives Rescuers another set of "ears" that can be positioned deep within a collapse. The speaker will provide a comforting voice to those trapped below.
The Rescue Probe accessory consists of a completely watertight and shock resistant Speaker and Microphone built into a cylindrical Stainless Steel housing with a Nylon tip. The diameter of the probe is 1.65" which allows it to easily pass through a 2" bore hole. Attaching user supplied Steel or PVC pipe to the threaded rear section of the Rescue Probe extends its reach allowing Rescuers to push it deeply into a collapsed structure through holes, cracks, debris, etc. and into voids and/or pockets where victims may be trapped.

If you would like to get more information about any of the above products, please go to our Info Request page.

For a more detailed description, visit Con-Space's website

CANADIAN SAFETY EQUIPMENT INC.
Tel:(905) 949-2741 or 1-800-265-0182
Fax:(905) 272-1866
2465 Cawthra Road, Unit 114 ( Directions to our building )
Mississauga, Ontario, Canada L5A 3P2
e-mail: info@cdnsafety.com
Copyright © 1997-2010, Canadian Safety Equipment Inc. All rights reserved.

Design and Maintenance by Webstar Solutions
Updated: August 12, 2010